Scythe Kaze Master Ace Black 5.25inch Fan Controller

The Kaze Master Ace is an updated version of the Kaze Master. The only difference is the fact that Ace version has an aluminium front bezel to further increase the good looks of this already good looking product!

Just like the original Kaze Master the Ace version shows the RPM of each connected fan and the temperature of the four supplied probes. One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Master Ace can! So if you only want a fan to run under certain circumstances then this could be your ideal fan controller.

As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.

Specifications
Model No. -KM02-BL 
Measurements (W x H x D) - 148.5 x 42.5 x 63 mm 
Display Measurements (W x H) - 114 x 20 mm 
DC Input - 5V or 12V (from PSU) 
Fan Adjustment Range - 3.7 V (±10%) ~ 12 V (±10%) 
Fan Channels - Four 
Maximum Ampere per Channel - 1 Amp 
Fan Speed Range - 0 ~ 9990 RPM (displayed in 30 RPM steps) 
Number of Temperature Sensors - Four 
Temperature Range - 0 ~ 100°C / 32 ~ 199.9°F 
Measurement Frequency - 2 Seconds 
Weight - 165g