Scythe Kaze Master 5.25inch Fan Controller, Black

The Kaze Master Fan Controllers are possibly the best looking fan controllers ever to grace our product range. When switched off, they look like a plain bezel apart from the dials. It is only when they are switched on that you see any type of display.

The display shows the RPM of each connected fan and the temperature of the four supplied probes. One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Masters can! So if you only want a fan to run under certain circumstances then these could be your ideal fan controllers.

As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.

Features
1. Manual fan speed controller with temperature sensors
2. Controls up to four 3-pin or 4-pin (PWM) fans
3. Fail safe alarm - alarm sounds if fan fails
4. Able to completely stop the fan, if desired
5. Looks "fan"-tastic!
 

Specifications
Dimension - 148.5 x 42.5 x 63 mm (WxHxD) 
Display Dimension - 114 x 20 mm 
Fan Channel - Four 
Temperature Module Channel - Four 
Weight - 165g 
DC Input - 5V or 12V (from PSU) 
Fan Adjustment Range - 3.7V - 12V 
Maximum Fan Amp - 1A per channel 
Fan Speed Range - 0 - 7500 RPM (Display Range: 30rpm Incremental) 
Temperature Range - 0 - 100°C / 32 - 199.9°F 
Measurement Frequency - Every two seconds