Nesteq FanMax 8-Channel Fan Controller, Black

Nesteq's FanMax fan controller is an ideal device to control and adjust the speed of your PC's cooling fans. The FanMax uses "Cooling Zones" that allow up to four fans to be turned on/off at the touch of a button. This gives quick and simple control over the airflow / noise balance.

The voltage going to each connected fan, depending on your settings and requirements, can be precisely adjusted from 6 to 12 volts. Whether you want high or low fan speed or somewhere in between, the FanMax can control each fan independently for greater flexibility.

FanMax comes with all necessary cables to connect up to 8 fans with either 3-pin (standard) or 4-pin (PWM) connectors. All you need is an unused 5¼" (optical drive) bay and then you are ready to go.

Features
1. Available with black or silver aluminium front bezel
2. Controls up to eight fans simultaneously
3. Easy setup with two separate "Cooling Zones"
4. Blue LEDs indicate the on/off state of each "Cooling Zone"
5. Each "Cooling Zone" can be turned on or off independently
6. Precise 6 to 12 volt adjustment range for each connected fan
7. Compatible with 3-pin (standard) or 4-pin (PWM) fans
 

Specifications
Model Number - NF2108B 
Dimensions (L x W x H) - 78mm x 149mm x 43mm 
Suitable for - Standard 5.25" slot 
Material - Aluminium and plastic 
Cable length - 600 mm 
Connector type - 3-pin or PWM compatible 
LEDs - 2 blue LEDs for main switches (Cooling Zones), 8 LEDs for fan monitoring 
Rated input voltage - DC 12 volt (4-pin standard Molex) 
Rated output voltage / power - 6 - 12 volts / 6W per channel, 48W total