Scythe Kama Panel 3

Features

1. Two channel fan controller, with LCD display
2. Two USB2/E-SATA ports
3. Multi-format card reader
4. Mic and headphone ports
5. Hot-swap 2.5" drive bay

Fan Controller
The Kama Panel features a 2-channel fan controller with an LCD display for temperature and fan speed readouts. It also features a temperature alert function between 40°C and 90°C in steps of 1°C. When the temperature exceeds a set value or is not registered, the temperature displayed will flash and omit a audible alarm. The alarm can be muted by pressing the "MODE" button. Retractable fan controller dials makes the Kama-Panel 3 suitable for use in PC-Cases with a door panel.

Power e-SATA, USB2 Ports and card reader
On the front of the panel there are two ports for e-SATA and/or USB2 devices. Scythe have cleverly designed a port that works with both USB and E-SATA! The Kama Panel 3 also has the function of reading many popular media devices such as MicroSD, standard SD cards, plus many more (full list below).

PC-Connections
It is also possible to use the Kama Panel 3 to power on or off the PC. It can relay the connections with the PC case's power switch and/or reset switch. This allows the PC case switch to be used at the same time as the power and reset switch on the Kama Panel. Either switch can be freely used depending on situation and convenience.

2.5" drive Mobile Rack function
Finally, the Kama Panel 3 features a hot-swappable 2.5" drive bay. This is ideal for SSDs or any 2.5" device that is no thicker than 9.5mm.

Specifications
Model-No. - SCKMPN-3000
Dimensions - 148.5 x 42.5 x 117.5 mm (WxHxD)
Compatibility - USB 2.0 and Multi-format Card Reader / Writer, Direct slots for MicroSD/MicroSDHC Card, Memory Stick Micro, SD, Memory Stick, Multi Media Card.
Voltage Range - 3,7 V (±10%) - 12 V (±10%)
Fan Output Current - Max 1 A (1 Channel)
Fan Speed Range - 0 - 9,900 rpm
Weight - 205 g / 7.23 oz
Accessory - Fan Cable (x2), Audio Cable, S-ATA Cable (x3), USB Cable, Power Cable, Sensor Cable (x2), Power Switch Cable Connector, Reset Switch Cable Connector, Installation Screws (x4)