Zalman ZM-MFC3 Multi Fan Controller

Zalman's flagship fan controller monitors and controls up to 3 standard 3-pin fans and 1 4-pin PWM fan, and also shows real-time display of PC uptime and overall power usage.

Features
1. Real-time display of PC uptime and overall power usage
2. Ultra-clear FSTN display with wide viewing angle
3. Four sensors for temperature monitoring and display
4. Monitoring and control of 3 standard fans and 1 PWM fan
5. Alarm system to notify non-operation of any of the fans
 

1. Power Load Meter: Displays Power Load between 10 ~ 999W. Readings between 1 and 9W are shown as "Lo" and readings above 999W are shown as "Hi".
2. Timer: Timer shows how long it has been running. It is reset when the computer is turned off.
3. RPM Display: RPM is displayed in units of 10RPM. Values of 200RPM and below are shown as "0". Values between 201 ~ 6000RPM are supported by the display.
4. Temperature Display: Displays temperatures between -9C and 99C. Temperatures below -10C are shown as "Lo". The Display will blink temperatures between 80 ~ 99.9C and display "Hi" for temperatures above 99.9C.
5. Fan Channel Display.
6. Jog Wheel: The Jog Wheel is used for adjusting Fan RPM and selecting a the Fan Channels. RPM can be set from 60 to 6000RPM in units of 60RPM. Please note, if the maximum speed of the fan connected is limited to less than 6000RPM, then the fan speed can only be increased to its limit.

Specifications
Dimensions (L x W x H) - 147 x 87 x 42 mm 
Power display range - 30 to 999 watts 
Temperature display range - -9.9°C to +99.9°C 
Fan compatibility - 3 x 3-pin and 1 x 4-pin (PWM) 
Fan speed control range - 60 to 6000 RPM 
Fan speed control method - Variable voltage (3-pin fans), Pulse Width Modulation (4-pin fan)  Maximum output current - 0.7 amps 
Output voltage range - 4-11 volts 
Input voltages - +12V and +5V DC 
EAN barcode - 0823884200799