Nexus EDGE Full Tower PC Case (no PSU)

The Nexus EDGE - massive, great airflow, silence and plenty of room for a host of HDDs and optical drives.

Motherboards
The Nexus Edge case is a full-tower case that is compatible with ATX/Flex, ATX/Micro ATX and Full ATX motherboards. Even extended ATX motherboard will fit inside of the motherboard without any issues!

Noise absorption wave foam
The side panels of the Edge case are fully covered with noise absorption wave foam to absorb noise and sounds coming from the components installed inside the case.

Stunning front panel
The front panel is manufactured from 3mm thick aluminium with three stunning finishes. The right hand side of the front panel has a recognisable aluminium hairline finish, while the left hand size has a sand-sprayed mat finish. Where these two different finishes meet, a thin aluminium strip has been polished to a mirrored, given it a elegant look.

Fans
Good cooling inside any case is an absolute must, which is why the Edge is supplied with three "Real Silent" 14cm case fans. These fans run at 1000 RPM and move a massive amount of air whilst remaining ultra quiet (18 db(A)).

Rubber Pads
When installing the power supply of your choice you will notice that the PSU sits on soft rubber pads. These pads prevent resonance and vibration. There is also plenty of space around the PSU to allow it to "breathe" so the fan speed of the PSU is not influenced by air obstruction.

Filters
At the air intake areas, such as at the front 14cm case fan, air filters have been positioned to keep the dust out of the case. There are also two filters installed at the bottom of the case to further reduce dust build up.

Tool-less Design
Finally, to keep things nice and simple the HDDs and optical drives can be fitted without any tools.

 Features
1. Massive computer enclosure
2. Acoustic material to help reduce noise
3. 10x 3.5" and 8x 5.25" drive bays
4. Lockable doors
5. Plush aluminium front door
6. Supplied with three 140mm fans, only 18.0 dB(A)
 

Specifications
Motherboard size - ATX, Full ATX, Micro ATX, Full ATX, Extended ATX 
Padding - Noise absorption wave foam 
PSU - Not included 
Case fans - 3 x 140mm | 1000RPM 
Front ports - E-SATA, 2x USB 2.0, MIC and AUDIO 
5.25" bay exposed - 8 tool less 
3.5" bay exposed - 1 tool less 
3.5"bay hidden - 9 tool less 
Expansion slots - 7 tool less 
Dimensions, mm - 642 x 239 x 576 (L x W xD) 
Front cover - Aluminium + ABS 
Chassis material - SECC 1.0 t 
Watercooling - 4 pipe holes for liquid cooling 
Feet - Rubber adjustable feet