Fractal Design Tesla 650W 80PLUS Power Supply

The power and efficiency - 80 PLUS!
When you buy a Fractal Design power supply, you can rest assured that you get what you pay for. It is 100% real wattage and guaranteed to run at continuous load on a specified wattage. One other important factor with this PSU is that it very efficient, well over 80% and 80 PLUS certified.

The silence
Apart from being powerful, these power supplies won't damage your ears. On the contrary, it will be hard to know if it's actually running or not! With a hand-picked, high quality 120mm fan mounted with rubber mountings, the fan will only spin as much as needed under varying loads. The high efficiency of over 80% is crucial, since it minimises the heat the power supply emits, enabling the fan to spin at lower speeds and therefore stay quiet.

The Quality
Every manufacturer claims to have this, but Fractal have real life numbers to show: less than 1% returns rate is an impressively low number. They value durability when creating the power supplies and never choose to save costs when choosing internal components.

Features
1. Quiet and 80 PLUS certified - save your ears and the environment
2. 100% real wattage - this PSU delivers what it claims to!
3. Four +12V rails
4. Quality - Durability and extremely low failure rate
5. Extra long cables to support full tower cases
6. Five years warranty
 

Specifications
Product code - FD-PSU-TESLA-650 
Size (D x W x H, mm) - 140 x 150 x 86 
ATX12V Version - v2.3 
EPS12V Version - 2.91/2.92 
20+4-pin ATX Connector - Yes 
ATX12V (4+4-pin) support - Yes 
PCI-E support (6+2-pin) - Yes, x4 (45cm long) 
Number of floppy drive connectors - 1 
Number of hard drive (Molex) connectors - 5 
Number of SATA power connectors - 6 
Master power on/off switch - Yes 
Acoustic noise level - 18 db(A) to 31 db(A) 
Fan size - 120mm, thermally controlled 
Length of motherboard power cable - 65cm approx 
+3.3V maximum output current - 24 A 
+5V maximum output current - 24 A 
+12V1 maximum output current - 20 A 
+12V2 maximum output current - 20 A 
+12V3 maximum output current - 20 A 
+12V4 maximum output current - 20 A 
+12V combined - 600 W 
-12V maximum output current - 0.5 A 
+5VSB maximum standby current - 2.5 A 
Combined maximum output +3.3V / +5V - 140 W 
Continuous load capacity - 650 W 
Peak load capacity - 700 W 
Power conversion efficiency - 80% PLUS 
Mains input voltage - 115V-230V 
Safety Certificates - CE, EMC and LVD 
Protection - Over Current/Voltage/Power Protection, Under Voltage Protection and Short Circuit Protection 
PFC - Active