Nexus Clodius Ventilation Pro PC Case

The Nexus Clodius Ventilation Pro Series is a great case to build an optimally ventilated computer. The Clodius case is equipped with two Real Silent 120mm case fans (black/white version) which are mounted with ultra soft silicone fan mounts to prevent resonance and vibration. When more airflow is needed you can mount an extra 80, 92 or 120mm fan on the ceiling of the case and/or an 80mm fan at the unused PCI slots. The soft rubber feet prevent overall resonance of the case.

One of the unique features of this case is the illuminated fan controller. Inside the case is a temperature sensor which measures the internal case temperature. When the controller indicates blue then the inside temperature is at its lowest and the controller can be set to run the fan(s) at their slowest speed(s).

When the case's internal temperature rises the controller will turn violet. When you notice this, you can improve the internal conditions by setting the fan speed to medium to increase airflow and cooling. If the temperature inside the case rises too high, the controller light will turn red and it is then advisable to set the dial at or near full speed. The two pre-installed fans will then spin at up to 1700 RPM and will push a massive amount of airflow through your system.

This will guarantee optimal silence where possible and superb cooling where necessary!

Features
1. Unique fan controller with temperature-sensitive light
2. Supplied with two quiet Nexus 120 mm fans
3. Includes silicone fan mounts and anti-vibration feet
4. Intake holes all have fan dust filters
5. 7 x 3.5" and 4 x 5.25" available drive bays
 

Specifications
Model number - Clodius 
Motherboard size - ATX/M-ATX 
PSU - Not supplied 
Case fans - 2 x 120mm | 1000-1700 RPM 
Fan mounts - Ultra-soft silicone fan mounts 
Fan controller - Dial with LED in front, connects up to 2 fans 
Front ports - 2 x USB 2.0, Mic and Audio 
5.25" bay - 4 x front accessible (2 x with DVD door) 
3.5" bay - 1 x front accessible 
HDD bays - 7 HDD bays 
Thumb screws - 12 pieces supplied 
Airflow - 36.87 CFM / 62.6 m³/hour 
Case size - 41.9 x 18 x 49.5 cm (L x W x D) 
Case weight - 6.2 kg