AeroCool X-Predator Evil Black/Orange Ultimate Gaming Case, No PSU

Features

The case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The Xpredator Evil Black is finished in a black and orange combination. The PCI covers, motherboard plate and screw-less kits are coloured orange which makes the case stand out from the crowd as well as making it look unique!

 

The Xpredator case is designed with "User-Friendly" concept in mind and it gives the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make this chassis easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.

 

The chassis offers great expansion capabilities. It supports six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis is also deep and large enough to accommodate high end graphics cards up to 330mm in length. It also supports XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The Xpredator features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the case wide enough to support high end CPU coolers up to 190mm tall.

 

To maximise air flow there are eight positions for fans, one front orange LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.

 

Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.