Additional Information
The XSPC tops are performing the best in all system configurations, a true tribute to the design and tweaks that have occured in the current design...excellent!!
In the end, these tops can afford you as much as 1.08 GPM gain on low restriction systems, .51 GPM on an average restriction system, and .12 GPM on extremely high restriction
systems..... that's a good flow rate gain!!
The XSPC reservoir top is KING of the DDC 3.2 tops tested!
XSPC Pump Top Spec (w/18W DDC-1 Ultra):
- Model: XSPC Pump Top V3
- Top Dimensions: 80 x 65 x 25mm
- Material: 100% Plexyglass
- Surface Finish: Smooth & Transparent
- Inlet/Outlet Thread Type: G1/4 (1/4" BSPP)
- Max. Head Pressure (at 12V): 4.7m
-
Max. Discharge (at 12V): 950 lt/hour
DDC-1T Pro (10W) Spec:
- Nominal Voltage: 12 VDC
- Operating Voltage range: 6 - 13.2 VDC
- Motor Type: Electronically commutated, brushless DC, spherical motor
- Max. Head - Blue Impeller: 3.7m
- Max. Discharge - Blue Impeller: 564 lt/hour
- Electrical Connector: 4pin Molex
-
RPM Sensor: 3 pin connector
DDC-1T Plus (18W) Spec:
- Nominal Voltage: 12 VDC
- Operating Voltage range: 8 - 13.2 VDC
- Motor Type: Electronically commutated, brushless DC, spherical motor
- Max. Head - Blue Impeller: 4.7m
- Max. Discharge - Blue impeller: 950 lt/hour
- Electrical Connector: 4pin Molex
-
RPM Sensor: 3 pin connector
Included:
- (4x) Stainless Steel M4 Phillips Head screws
- (1x) Laing DDC-1+ Ultra Pump
-
(1x) XSPC V3 Pump Top Clear
NOTE: This pump has a blue wire 3pin wire seperate to the power lead, attach this to the Motherboard for RPM monitoring. You can also program the bios to shut down the pc or sound an alarm on RPM drops
